NPO法人 ESD協会
Japan ESD Association
| HOME | CONTACT |

ESD Seminar

ESD Seminar

 

ESD Seminar

 

 

 2011.11.1

ESD reliability, technology exhibition / the basic technical seminar

ESD reliability, technology exhibition / the basic technical seminar was held from November 1st to November 2nd, 2011, at PiO (Plaza Industry Ota). We finished it with great success. Thank you very much. 

 

Schedule:

 

09:30-09:50 Acceptance Time
09:50-10:00 Opening Address by ESD Association
10:00-12:00 Seminar (morning session)
12:00-13:30 Lunch Break
13:30-15:30 Seminar (afternoon session)
15:30-15:40 Coffee Break
15:40-16:00 Questions and Answers
16:00-16:05 Closing Address by ESD Association

 

Speaker: Mr. Arnold Steinman, M.S.E.E

 

Contents:

ESD Basics

-       ESD Definition and Charge Basics

Arnie_ESD_Photo.jpg-       Measurement Instruments

-       Charge Generation

-       Charge Flow in Materials

-       Static Control Methods

   Grounding

   Dissipative Materials

   Ionization

-       Claenroom Static Control

-       ANSI/ESD S20.20 / IEC61340-5-1

-       ESD Models

-       Auditing Basics

-        

Brief Introduction of Mr. Arnold Steinman

Arnold Steinman is a consultant in electrostatics, static charge control, and ionization,   utilizing the knowledge and experience gained in 25+ years as Chief Technology Officer for Ion Systems, Alameda, CA.  He holds four patents covering air ionizer technology.  Steinman graduated from the Polytechnic Institute of Brooklyn, receiving both BSEE and MSEE degrees.

Steinman served as a member of the Board of Directors of the ESD Association and a past chairperson of the Ionization Standards Committee. Steinman was also a senior member of the Institute of Environmental Sciences and Technology (IEST), a contributor to IEST standard RP-CC-022, “Electrostatic Charge in Cleanrooms and Controlled Environments", and a member of the Electrostatics Society of America. For 15 years he has served as leader of the SEMI ESD Task Force, which has produced  E78-0309 - “Guide to Assess and Control Electrostatic Discharge (ESD) and Electrostatic Attraction (ESA) for Equipment”, E43-1108 – “Guide for Measuring Static Charge on Objects and Surfaces”, and E129-0709 – “Guide to Controlling Electrostatic Charge in a Semiconductor Manufacturing Facility”. He was the SEMI representative on static control to the International Roadmap for Semiconductors.

Steinman has contributed technical articles to industry publications such as Micro, Semiconductor International, Data Storage, Evaluation Engineering, Compliance Engineering and Cleanrooms magazines. He served on the editorial board of Micro and Compliance Engineering magazines. He has made technical presentations at the ESD Association Symposium, the IEST annual technical meeting, the International Committee of Contamination Control Sciences (ICCCS) meetings, Electrostatics Society of America (ESA), SEMI technology forums, and for many other national and international industry groups.

 

 

P1040310.JPGのサムネール画像P1040307.JPGのサムネール画像

 

 

 

 

 

 

 

 

 

 

2011.11.1

ESD comprehensive lecture

ESD comprehensive lecture supported by ESD Association was held on November 1st, 2011, at PiO (Plaza Industry Ota).

 

2010.10. 21-22

ESD reliability, technology exhibition / the basic technical seminar

The exhibition and the seminar were held on October 21  - 22,  2010 at PiO (Plaza Industry Ota).

 

Schedule:


October 21 (Thu)
10:30-11:30
Theme: Symptoms of Electrostatic and Electrostatic Discharge (w/ demonstration)
Speaker: Teruo Suzuki (Kasuga Denki, Inc.)

11:30-12:30
Theme:  Grounding the Human Body
Speaker: Motoki Kawamura (Midori Anzen Co., Ltd.)

13:30-14:30
Theme: Equipment for Electrostatic Discharge (Ionizers)
Speaker: Satoshi Mizutani (Harada Corporation Co., Ltd.)

 

October 22 (Fri)
10:30-11:30
Theme: ESD Controlling Materials
Speaker: Tatsuya Kawasaki (Krefine Co., Ltd.)

11:30-12:30
Theme: Testing Device (ESD, CDM, Latch-Up)
Speaker: Hideki Sadohara (Tokyo Electronics Trading Co., Ltd.)

13:30-14:30
Theme: How to Measure the Electrostatic Discharge (w/ demonstration)
Speaker: Tadashi Takahashi (Trek Japan K.K.)

 

2010. 7. 30

ESD Association Forum

The forum organized by the ESD Association was held on July 30, 2010 at PiO (Plaza Industry Ota). It was held at the same meeting hall with DISCON JAPAN supported by IDEMA JAPAN. The countermeasures against ESD are considered as the important thing, and the Hard Disk industry operates the very harsh countermeasures. The theme for this forum was ceramic and resin materials.

 

Schedule:


12:30  Acceptance time
12:55  Opening Address (ESD Association)
13:00  ”Current Status of the ESD Ceramic Materials”
       Speaker: Katsuhito Takano (West One Corporation)
14:00  Questions and Answers
14:15  "Current Status of the ESD Resin Materials”
       Speaker: Tatsuya Kawasaki (Krefine Co., Ltd.)
15:15  Questions and Answers
15:30  “Evaluation for Materials of Electrostatic Discharge”
       Speaker: Tadashi Takahashi (Trek Japan K.K.)
16:15  Questions and Answers
16:30  Closing Address (ESD Association)

 

 

 2010. 5. 13

ESD Association Forum (Functions and specifications for ionizers)

The forum presented by the ESD Association was held on May 13, 2010 at PiO (Plaza Industry Ota). Thank you very much for joining us.

 

 Schedule:


12:30  Acceptance Time
12:55  Opening Address (ESD Association)
13:00  ”Proposal for the ESD Techniques by Using the Soft X-Ray”
       Speaker: Satoshi Mizutani (Harada Corporation Co., Ltd.)
13:50  Questions and Answers
14:00  ”Proposal for the Ionizers Using the New Concept”
       Speaker: Tadashi Takahashi (Trek Japan K.K.)
14:50  Questions and Answers
15:00  ”Proposal for the Maintenance of Ionizers”      
Speaker: Masayuki Kawakita (Simco Japan)
15:50  Questions and Answers
16:00  ”Trend of the Ionizer Evaluation Technology”
      Speaker: Shinichi Yamaguchi (Trek Japan K.K.)
16:30  Questions and Answers
16:40  Closing Address (ESD Association)